Cement Remover and Metal Protector

Services

Cement Remover and Metal Protector; It is an active product which is a mixture of strong acids and metal protector corrosion inhibitors.

Product Name: CEMENT REMOVER

USAGE AREA

It is used for cleaning dry cement stains, clingers, lime scales and stains. It can be used securely on rubber and plastic surfaces. (It is suitable for usage in all metal surfaces except aluminum, zinc alloys.)

USAGE METHOD

Before using the product, pre-wash with high-pressure water in the tanks. Before using chemicals, make sure that the surfaces are dry.

SPOT & POINT CLEANING METHOD

In heavy contamination, product should be used in concentrated form without diluting. In slighter contamination it can be used by diluting with water with a rate of 10-30%. Prepared solution is sprayed to the surface and it should be left for 15-20 minutes on the surface for reaction. After the cleaning is completed, it should be rinsed with fresh water.

TYPICAL PHYSICAL CHARACTERISTICS

Solubility:  Completely  Water-Soluble
Storage Temperature:  -5 and 30 °C
Water Dilution Rate:  % 5 – 1/1 – 1/5
Chemical Material Storage: Storage period is 3 years

The above mentioned statements are standard cleaning procedures and they may vary based on the physical condition of tanks, lockers and load types.

During usage, the solution should be prepared by adding acid to the water while diluting the product. No water should be added to acid. The environment should be ventilated when the product is used.

Click to Chemical Products page to see our all chemical products.