Lime Cleaner

Services

Lime Cleaner is an acid-based product used for discharge of lime, limestone etc. in lockers.

Product Name: UNITEDCHEM-LIME CLEANER

USAGE AREA

It is used to clean lime, limestone and salt residues from the locker surfaces. It is a Corrosion inhibitor reinforced mixture of strong acids and surface active agents. It is not suitable for use in aluminum, galvanized and zinc silicate coated tanks.

USAGE METHOD

Before starting cleaning with chemicals, large parts to be cleaned by hand must be mechanically removed. Care must be taken that the surface is dry. The dilution rate of the product varies depending on the pollution rate and the applied method.

1 – SPRAYING METHOD – BRUSHING METHOD

It is sprayed on the surface by spraying solution prepared in 1/2 -1-3 ratio or applied to the surface with brush. It is expected to react on the surface for 15 minutes. After cleaning, the surface should be washed with pressurized water

TYPICAL PHYSICAL CHARACTERISTICS

Solubility:  Completely  Water-Soluble
Storage Temperature:  -5 and 30 °C
Water Dilution Rate:  1/2 – 1/3 %
Chemical Material Storage: Storage period is 3 years

The above mentioned statements are standard cleaning procedures and they may vary based on the physical condition of tanks, lockers and load types.

WARNING: During usage, solution must be prepared by adding acid to the water while diluting the product. Never add water to acid. The environment should be ventilated while using the product.

Click to Chemical Products page to see our all chemical products.