Maintenance and Cleaning

Services

1. ACC-9 TR (AIR COOLER CLEANER)

ACC-9TR is a solvent-based chemical product that is useable on any kind of metal for removal of oil, grease, dirt, soot, and carbon deposits accumulated in air coolers of diesel engines. Formation of oil, grease, dirt, soot, or carbon deposits in air coolers reduces heat transfer, improving air resistance. The effectiveness of air coolers is maintained in maximum level through the use of ACC-9TR. Its application methods include immersion baths, circulation, and direct-injection by wetting. If heated up at 50 – 55°C , the product will result in better performance. Ventilation of the enviroment should be provided during the cleaning process.

2.TRİO WABAC (ALL PURPOSE CLEANER)

TRIO-WABAC is a water-based odourless chemical detergent formulated for general cleaning purposes and used for removal of oil, grease, dirt, and carbon deposits accumulated in engine room and deck. This product is not harmful for environment or human health. TRIO-WABAC may be not only used with circulation, brushing, spraying, or immersion methods, but also provides optimum performance in ultrasonic cleaning process. It does not contain petroleum solvents and is fully soluble in water. In case of lower contamination degree it should be diluted at the rate of 5-10% and waited for 10-15 minutes, then should be rinsed with a high-pressure water jet. Rinsing water temperature may be raised up to 50°C.

3. TRI-OSA (OIL SPILL AVSORBANT-POWDER)

4. TRIOALK – 212 EXTRA (ALKALINE LIQUID)

TRIOALK – 212 EXTRA is a biodegradable water-based alkaline cleaner used for heavy duty cleaning. TRIOALK-212 EXTRA is free from hydrocarbon solvents. It can be used safely in cleaning grease, fuel-oil, vegetable and animal oil, mud, sludge, soot, dirty and carson deposits. Also can be used for cargo hold cleaning after coal and petcoke. TRIOALK – 212 EXTRA can be used safely on expoxy surfaces. Methods of application; brush, hand spray, fabric, immersion, high and low pressure washing machines. TRIOALK – 212 EXTRA can be diluted in a ratio 1/3 with water for cleaning soot and 1 lt product cleans 10-15 m2 area. 5-10 lt TRIOALK-212 EXTRA can be used per ton wash water in cleanings of washing machines. In spot cleaning, 20 % solution can be preposed. The amount varies depending on the amount of pollution.

5.TRİOBREAK-196 (MULTI CLEANER)

TRIOBREAK-196 is a general-purpose solvent chemical cleaning agent containing no hydrocarbons or caustics. It is safe for all materials, and can be applied on contaminated or oily surfaces through brushing, hand-spraying, or ultrasonic method. It may be utilized in fiberglass hulls, cargo tanks, engine room, and decks. TRIOBREAK-196 may be diluted at the rate of 5-10% depending upon the contamination degree of the area to be cleaned.

6.TRİOCAR-333 (CARBON REMOVER)

TRIOCAR-333 is a solvent-based and solvent-effective concentrate, which penetrates into and softens any carbon deposits accumulated in engine blocks or pistons, oil pumps, pipes, oil filters, valves, etc. of diesel machinery. In presence of soft deposits, TRIOCAR-333 must be applied on the area to be freed from slag or deposits for 1-2 hours. This duration of application should be extended and a concentrate be used in the event of removal of hard accumulations. If heated up at 50 – 60°C, the product will render better performance.Ventilation of the enviroment should be provided during the cleaning process.

7.TRİOCAUS (WATER BASED ALKALİNE CLEANER)

TRIOCAUS is a water-based cleaning agent with higher pH value for general cleaning purpose, which is used in removal of animal and vegetable oil, grease, soot, carbon deposits. This product does not contain any hydrocarbon solvents. Its application methods include brush, spray, high or low pressure washing machines. TRIOCAUS should be diluted at the rate of 2-20% and rest for 20-30 minutes; meanwhile, the surface should remain wet continuously. Rinsing process should be done with warm water after completion of cleaning work.

8.TRİOFA-140 (HEAVY DUTY ALKALINE CLEANER)

TRIOFA-140 is a water-based dirt cleanser without caustic, which is used in cleaning processes in living space. This chemical detergent may be used safely in any surfaces in living space, except for food storages. TRIOFA-140 may be not only used in the form of concentrate, but also diluted at the concentration of 5-10% depending upon the contamination degree of the area to be cleaned. Rinsing process should be done with water after completion of cleaning work.

9.TRIOFILT 17 (FILTER CLEANER)

TRIOFILT-17 is a solvent-based and efficient cleaning chemical used in removing partly carbonized oil and grease in oil heaters and oil towers. When heated at up to 50-55 °C and applied for 8 to 24 hours, TRIOFILT-17 gives excellent result. It is recommended to use concentrate.Ventilation of the enviroment should be provided during the cleaning process.

10.TRIOIL (OIL&GREASE REMOVER)

TRIOIL is a surface active substance and solvent-based heavy oil and grease remover, which is used for cleaning oil and grease deposits. After using TRIOIL in machinery, deck, engine room, and metal components the cleaned area must be rinsed with warm or cold (preferably warm) water. TRIOIL applications include spraying, brushing, dipping, applying or circulation. The product may be diluted with water depending on the contamination degree of the oil or grease to be removed.Ventilation of the enviroment should be provided during the cleaning process.

11.TRIOIL-HD (SOLVENT BASED ULTRASONIC CLEANER)

12.TRIOSINT-690

TRIOSINT-690 is a solvent-based concentrated cleaning agent to be used for local removal of mineral oil and heavy oil residues in bilge tanks, engine room, and machinery. It may be utilized without dilution in cleaning of tanks. It is applied through brushing, spraying, or immersion method. TRIOSINT-690 must be made available for 30-60 minutes on the surfaces to be cleaned and, after completion of application process, must be rinsed with warm water (at 60°C) by the aid of a high-pressure water jet.Ventilation of the enviroment should be provided during the cleaning process.

12.TRIO TANK (TANK CLEANER)

TRIOTANK is a concentrated tank cleaning agent, which is the mixture of surface active substances and solvents used for removing residues and deposits of petroleum products in cargo and bottom tanks. Having a rapid penetrative and emulsifying feature, it can be used on a number of tank surfaces easily. The quantity of utilization and dilution with water of TRIOTANK varies depending on quantity and nature of contamination as well as on ambient temperature. TRIOTANK’s application methods include: rock & roll, circulation, direct chemical dosage or spot cleaning. After cleaning process tanks must be washed with plenty of water.Ventilation of the enviroment should be provided during the cleaning process.

13. TRIO TANK/R (TANK CLEANER)

14.TRIOWASH (GENERAL PURPOSE CLEANER)

TRIOWASH is a general-purpose water-based cleaning agent with abundant foams, which is used for removal of oil, dirt, grease, etc. in living space, deck, hotel, cuisine, or refectory. Being fully soluble in water, it is not harmful for human health or environment. It must not be used in washing machines. After being diluted at the rate of 10-25%, TRIOWASH will provide excellent result within a few minutes upon spraying or applying it with a cloth or brush on dirty surfaces to be cleaned. Rinsing process should be done with water after completion of cleaning work.

15. TRIOWASH/HP (GENERAL PURPOSE CLEANER)

TRIOWASH/HP is a remover of heavy dirt, which is the mixture of surface active substances and chemical detergents used in living space, tank tops, bilge tank, engine room and deck. This product is a general purpose cleaning chemical and does not contain any petroleum remover. It softens and removes heavy and stubborn stains. In cleaning operations in high and low pressure washing machines and in the form of spraying you should make sure that a TRI-WASH/HP solution of 1-5% properly penetrates into dirty surface for 3 to 5 minutes. In cleaning using spray, brush, etc., this product may be diluted with water at the rate of 5-20% depending upon the contamination degree of the area to be cleaned. Rinsing process should be done after completion of cleaning work.

16.TRIO ELECTRIC (ELECTRO CLEANER)

TRIOLECTRIC is an anti-corrosive and fully-evaporating solvent-based cleaning agent to be used for cleaning of electrical materials. TRIOLECTRIC is flameproof and necessitates sufficient ventilation during its application. This product must be used in the form of concentrate, but not be diluted with water. TRIOLECTRIC’s application methods include wiping, spraying, or immersion methods, through which any dirt, grease, soot, or carbon deposits accumulated in the equipment to be cleaned will be properly removed in a few minutes to 1 hour (depending on the contamination degree). Drying-up process should be done with air pressure after completion of cleaning work.

17.TRIO ELECTRIC-QUICK (ELECKTRO CLEANER)

TRIOLECTRIC-QUICK is an anti-corrosive and fully evaporating, rapidly volatile and solvent-based cleaning agent, which is used for cleaning of electrical components. Never dilute this product with water; instead, use it in concentrate form. TRIOLECTRIC-QUICK’s application methods include rubbing, spraying, or dipping; and any dirt, grease, soot, or carbon deposits accumulated on equipments to be cleaned will be removed in a few minutes to 1 hour (depending on the contamination degree). Drying-up process should be done with compressed air after completion of cleaning work.Ventilation of the enviroment should be provided during the cleaning process.