Picking Liquid

Services

Picking Liquid: It is a chemical used with chromium tanks in order to remove oxide layer and tarnishes which are formed with time. It is a mixture of strong acids and surface active agent.

Picking Liquid

Product Name: UNITEDCHEM-PICKLING LIQUID

USAGE METHOD

Before starting UNITEDCHEM-PICKLING LIQUID pickling operation, the tanks must be completely free of oil and other contaminants .

1 – CIRCULATION METHOD ( ONLY FOR CIRCUITS )

The circulation method is suitable for use in pipelines. UNITEDCHEM-PICKLING LIQUID is circulated in the pipeline for 2 hours. Rinse

with distilled water until the acid is completely removed after the process. After rinsing, it is necessary to perform the drying process. The metal
is tested with the aid of a palladium test kit.

2 – SPRAYING METHOD

The product is concentrated on the tank walls and sprayed without dilution with water and expected to react on the surface for 30 minutes. Rinse with distilled water after cleaning. The passivity of metals is tested with the palladium test kit.

TYPICAL PHYSICAL CHARACTERISTICS

Solubility:  Completely  Water-Soluble
Storage Temperature:  -5 and 30 °C
Water Dilution Rate:  Used as concentrated
Chemical Material Storage: Storage period is 3 years

The above mentioned statements are standard cleaning procedures and they may vary based on the physical condition of tanks, lockers and load types.

WARNING: During usage, solution must be prepared by adding acid to the water while diluting the product. Never add water to acid. The environment should be ventilated while using the product.

Click to Chemical Products page to see our all chemical products.